SS Newell Sleeves Beware

[Tunacious]

Contact Gregg Chow (chowderpuff7@yahoo.com) to see if he knows of anything different but I'm 99% sure there's no alum frames made for the blackies - Tibs, Accu's, II Sharps or Bakers

[Black Pearl]

Yeah I try to be careful with these side plates, was hoping to get a Tiburon frame but the last time I checked there was none, has anyone made a Tib frame for this model?

You can also get a SS spacer bar for your 338.

http://alantani.com/index.php?topic=12127.0

[Newell Nut]

Did you make any of those bars for a 332?

[Black Pearl]

Did you make any of those bars for a 332?

Does 332 use the PENN Squidder spacer bar as well? If so, it is in progress.

[Tunacious]

A 332 Newell would equal a 99 size Penn.

[Fishit 2]

What do you guys think about the SS conical dome(aftermarket) compared to stock? Was hoping for some increased drag range as well.

I have about a dozen Tiburon frames I bought off Gregg over the years, last time I asked him he didn't carry them, maybe writing to Tiburon direct would work.

[Bryan Young]

What do you guys think about the SS conical dome(aftermarket) compared to stock? Was hoping for some increased drag range as well.

I have about a dozen Tiburon frames I bought off Gregg over the years, last time I asked him he didn't carry them, maybe writing to Tiburon direct would work.

I used SS conical dome spring washers in my kits and they work great.  No problems so far, but I'm sure over time, they will fatigue and crack as most do.  The spring washer will, in itself, will not substantially increase drag range, but adding additional drag surfaces.

Please see the following:

Newell 200/300/400 Series - http://alantani.com/index.php?topic=7568.0
Newell 500 Series - http://alantani.com/index.php?topic=8201.0
Newell 600 Series - http://alantani.com/index.php?topic=9284.0