Second dog on penn 704

[ReelCurious]

Nice job.  I was just researching putting a double dog on the 710Z and found this.  I don't know if there is enough material to tap it, so I was thinking of drilling through the body housing like the eccentric is setup to make a post but not using the full eccentric assembly.  No need to be able to disengage the AR.  Did you try alternating the dogs?  My intention was to cut down on the back play in the handle by alternating them.

[handi2]

Many people are now installing the one way bearings in the handle shaft and the spool shaft bushing. I'll get some pics when I can.

[ReelCurious]

I thought I read that it exerts too much pressure on the stock internals without hardening.  I think it was the LR3 post from a while back when he did it.

IAR and converting the bail to manual (not bail less) would make a perfect reel.  Was going to explore the bail after the double dog.

[wallacewt]

hi marcq
if you put fins on your dogs
you can do away with the springs
and have no clicking
i like the clicking,it reminds me i got ss
cheers

[ReelCurious]

hi marcq
if you put fins on your dogs
you can do away with the springs
and have no clicking
i like the clicking,it reminds me i got ss
cheers

What do you mean fins with no spring?  I can't picture how you could make the dog silent.

[wallacewt]

hi marcq
ill post some photos and show you how to do it
as soon as i get time
cheers

[wallacewt]

hi marcq
850ss silent double dogs.no springs.

replaced parts on the right
on the left
double dogs with fins
dog screws
10 tooth ss ratchet
2 ss stoppers,they go under the retaining plate and on the back of the dogs

here it is put together

lower the rotor ,tighten the nut.your done
comments
when you remove the rotor both fins will widen,so take it easy
i dont have any ss dogs with fins
you could do away with the lower eccentric but i didnt bother.