Penn special senator 114hl

Wicho5981 · October 29, 2015, 11:58:28 PM

What year was my reel made

Tightlines667 · October 30, 2015, 12:22:03 AM

1996-2004, probably late 90s.

https://www.mysticparts.com/PennParts/ReelSpecs/Penn113H.aspx#specs

"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"

swill88 · October 30, 2015, 12:25:01 AM

Quote from: Tightlines666 on October 30, 2015, 12:22:03 AM
1996-2004, probably late 90s.

https://www.mysticparts.com/PennParts/ReelSpecs/Penn113H.aspx#specs

Can you estimate the ages of the maroon plate 113H reels?

Shark Hunter · October 30, 2015, 12:34:23 AM

The 113H could be anywhere from the early sixty's and up. Certain details in the plates can give you a closer date.

Wicho5981 · October 30, 2015, 12:41:12 AM

Thanks I just bought this it's 114hl 6/0. II'm going to open this beast later on to see if it's good internal.I'll show some pics later. I have 2 now by the way.

Wicho5981 · October 30, 2015, 03:35:50 AM

I feel like like I'm missing a part on side plate where all the gear go so I took a picture

Shark Hunter · October 30, 2015, 03:55:22 AM

The only piece I see missing is an under gear washer. It all looks there. Solid 5 stack. I would wipe all those washers off. Put on some fresh Cal's.
The stack is a little out of order, but its all there.

garking84 · October 30, 2015, 04:01:07 AM

It looks like you're missing the eccentric jack. Did you leave any other parts on the side plate? If you removed everything then it looks like you'll also be missing the eccentric, eccentric spring, and handle side bearing.

Shark Hunter · October 30, 2015, 04:06:08 AM

Are they still in the plate?

Wicho5981 · October 30, 2015, 05:33:27 AM

The eccentric is on the plate button the other one not sure what it is

Wicho5981 · October 30, 2015, 05:39:02 AM

I put everything back together but its hard to turn the star drag.

RowdyW · October 30, 2015, 04:44:36 PM

You didn't cross thread it did you??

Wicho5981 · October 30, 2015, 05:58:58 PM

No crossthread

Shark Hunter · October 30, 2015, 06:06:05 PM

It has to be something in the stack if the star spins freely on the sleeve. Make sure the top eared washer didn't come out.

Maxed Out · October 30, 2015, 07:45:01 PM

Quote from: Shark Hunter on October 30, 2015, 06:06:05 PM
It has to be something in the stack if the star spins freely on the sleeve. Make sure the top eared washer didn't come out.

Ditto