114H gear sleeve spacer

Long Enuff · December 23, 2015, 08:43:41 PM

What type of washer/spacer do you use under the gear sleeve on an older Senator 114H to reduce the lateral play in the handle and sleeve?

Tightlines667 · December 23, 2015, 08:53:11 PM

You can make a shim out of thin aluminum (like a soda can) or buy stainless steel shims from Penn, shimano, or possibly from your local hardware store.

handi2 · December 23, 2015, 10:35:33 PM

There are peel away shims available at Mcallister Car online. Sal will chime in and show you.

Shark Hunter · December 23, 2015, 10:49:02 PM

I use the .010 thick Brass. 3/8"x5/8". They work on the 114H and up. part# 92678A278
http://www.mcmaster.com/#catalog/121/3256/=10daj2t

Long Enuff · December 23, 2015, 11:45:47 PM

Good info, thanks guys!

swill88 · December 24, 2015, 01:56:14 AM

Quote from: handi2 on December 23, 2015, 10:35:33 PM
There are peel away shims available at Mcallister Car online. Sal will chime in and show you.

thanks for that reference!

Tightlines667 · December 24, 2015, 03:05:47 AM

Quote from: swill88 on December 24, 2015, 01:56:14 AM
Quote from: handi2 on December 23, 2015, 10:35:33 PM
There are peel away shims available at Mcallister Car online. Sal will chime in and show you.

thanks for that reference!

X2

Long Enuff · December 31, 2015, 12:09:29 PM

Shark Hunter, the brass washers worked great. Put one in yesterday, problem solved. Thanks again.

Shark Hunter · December 31, 2015, 12:34:47 PM

We Aim to Please.

Tiddlerbasher · December 31, 2015, 01:35:02 PM

Daron I saw that as part of a sign in a public toilet

WE AIM TO PLEASE - YOUR AIM WOULD HELP

Long Enuff · December 31, 2015, 01:56:33 PM

She cleaned up nice.

sdlehr · December 31, 2015, 02:40:32 PM

She did clean up nice! Well done!