SX and MX locking plate screws

Started by mike1010, January 03, 2016, 09:13:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

mike1010

January 03, 2016, 09:13:17 PM
Would anyone know the thread on these screws (key 54 on the SX and MX series schematics)?  My thread gauges do not go that small.  Thanks.

Mike

mike1010

#1
January 29, 2016, 06:08:54 PM
Scott Throop from Avet came through:  2-56.  My reels have a little variation in screw length, but nominally 1/8 inch is probably right.  3/6 might be too long. 
Print
Go Up Pages1
User actions