Daiwa Firewolf 47H

Started by Reel 224, March 01, 2016, 08:03:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Reel 224

March 01, 2016, 08:03:06 PM
Bryan; Do you have any drag washers for the Daiwa Firewolf 47H?

Joe
"I don't know the key to success,but the key to failure is trying to please everyone."

Bryan Young

#1
March 01, 2016, 08:15:55 PM
Quote from: Reel 224 on March 01, 2016, 08:03:06 PM
Bryan; Do you have any drag washers for the Daiwa Firewolf 47H?

Joe

Hi Joe,

Metal washers or HT-100/Carbontex?  If metal washer, no.  If HT-100s/Carbontex, then probably yes.

Bryan

:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

Reel 224

#2
March 01, 2016, 08:37:46 PM
Quote from: Bryan Young on March 01, 2016, 08:15:55 PM
Quote from: Reel 224 on March 01, 2016, 08:03:06 PM
Bryan; Do you have any drag washers for the Daiwa Firewolf 47H?

Joe

Hi Joe,

Metal washers or HT-100/Carbontex?  If metal washer, no.  If HT-100s/Carbontex, then probably yes.

Bryan



Bryan: Thank you for responding so fast, I'm going to be breaking down the Daiwa as soon as I get finished with my work are and can better tell what I need. As near as I can tell there are three fiber washers in the stack and one under gear washer, I would need to replace those.

Joe
"I don't know the key to success,but the key to failure is trying to please everyone."
Print
Go Up Pages1
User actions