Are These Delrin Washers?

Started by mo65, July 09, 2016, 02:31:18 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Penn

#15
Thanks Sal,

Pulled the latest print for a 4-60, material states "Linen phenolic laminate w/ graphite"

tony

Alto Mare

Quote from: Penn on July 15, 2016, 03:38:07 PM
Thanks Sal,

Pulled the latest print for a 4-60, material states "Linen phenolic laminate w/ graphite"

tony
Thank you Tony!

I go some quick information on that stuff:

A fine weave cotton fabric base phenolic laminate which provides a finer surface texture and better machinability than Grade CE. Grade LE is low in moisture pick-up and dissipation factor, and is excellent in all electrical properties. It can be machined easily and cleanly to very close tolerances, and is recommended for use where there is need for good mechanical properties combined with excellent electrical characteristics.
Graphite is added as a solid lubrication.

This stuff sounds good, but Delrin might be a better choice.
Forget about all the reasons why something may not work. You only need to find one good reason why it will.

mo65

Quote from: Penn on July 15, 2016, 03:38:07 PM
Pulled the latest print for a 4-60, material states "Linen phenolic laminate w/ graphite"
Quote from: mo65 on July 09, 2016, 02:31:18 PM
They sure are slick...from the side look like a phenolic type material.

I have a hunch those glass fibers I mentioned might be carbon fiber.


Just call me Matlock...hee hee!  ;D
~YOU CAN TUNA GEETAR...BUT YOU CAN'T TUNA FEESH~