Luck

[Benni3]

But on a rounded drive shaft it's to difficult,,, so I used a random swirling style,,,now it a high proformance farm truck,,,,

[Benni3]

Drive shaft was to tight to spray,,,didn't want to but brushed automotive clear on it,,,,but it laid down ok,,,,

[Benni3]

And taped up sanded painted the part on the bumper,,,,

[Benni3]

Don't buy the spray can extensions,,,, they don't work,,,,

[Benni3]

Tear down,,,,going to repaint the bumper and grill i hope,,,,

[Benni3]

Sprayed the trim pieces,,,

[Benni3]

Wet sanded and wiped down with alcohol and hit it,,,,,

[Crow]

Super job, Benni!!

[Benni3]

Started the bodywork on it and the bed was pushed against the cab,,, Got it out but bent the top rail up a little,,,,

[jtwill98]

You need to take a break from the truck once-and-while. 

When are you going to get back to fishing? 

[Benni3]

Trout season over,new river the musky they stocked got everything else,,,the cove is 13ft down,,,it's wrong tine of season for Stripers at the lake and i got 3 new black hole rods,,,,,,

[Benni3]

You need to take a break from the truck once-and-while. 

When are you going to get back to fishing? 

Your not the first to tell me that,,,,

[Benni3]

Try to hit it right before dark when it's not so hot,,, First you got to find the dents,sand them,bondo and sand the top off with 80gt then hand sand with 180gt this is just the first coat on this side,,,,,