replacement carbontex for Ryoga 1016 and Ocea Jigger 2000P

[Marko]

Dear Dawn,

please advise replacement carbontex equivalent for Ryoga 1016 and Shimano Ocea Jigger 2000P as i don't see any specific product for these two reels. thanks

[Dawn]

Hi
The Trinidad 30 size drag washer set can be trimmed slightly on the outside edge to fit in the Jigger. 
As far as the Ryoga, I don't know. You can send me measurements, or check here:   http://www.smoothdrag.com/Carbontex_washer_sizes.pdf

Thanks!
Dawn

[Marko]

Thanks for the reply dawn..

i'll measure the diameter first of the Daiwa Ryoga.. thanks for the info regarding the Ocea Jigger 2000P.

thanks

[Marko]

Hi Dawn,

my customer measure his Daiwa Ryoga 1016 and he measure with ruler (no micrometer)...

there are two drag washer.

the first one having 30 mm x 22 mm
the second one having 32 mm x 27 mm

i think for the first one i can use number 47 (closest) with 30.95 x 21.6
and
for second one i can't found any match..

please help.. thanks

[Dawn]

I think the best you can do would be #50, and open the center hole with a dremel or sandpaper

Dawn