16/0 clicker button

[Shark Hunter]

Mike's Reel I refurbed for him a while back has a loose clicker button.
I know I have fixed this problem on the 12/0 with the button and c clip for the 115L2.
The button on the 14 and 16 is bigger, but is the shaft the same size?
I don't want to take the chance of peening a 16/0 plate and cracking it.
I have never had to replace a button on a 117 or 118.
I just don't know if it will work without two reels opened up to look at.
Then, I'm still not sure if I will be able to tell until I grind the rivet off, then there is no turning back.
The 9/0 through 16/0 use the same clicker tongue according to mysticparts, but the button side of the 14 and 16/0 have a bigger head.
The shaft has to be the same size at the tongue, but I don't know if it is tapered through the plate.
Then there might be a length issue with the plate thickness with the 115L2 button.
Anyone tried this?
Sal, John?

"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"

[Cortez_Conversions]

Daron, if you cant find a solution let me know and I'll make you something.
Tom

[Shark Hunter]

You got it Brother.