Calcutta D 401 bearing dimensions

Started by Jes301, April 27, 2018, 09:02:22 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Jes301

April 27, 2018, 09:02:22 PM Last Edit: April 28, 2018, 12:35:08 AM by Jes301
Trying to figure out the dimensions for the Calcutta D 401 ball bearings. I'm trying to upgrade the bearings on the  spool and tension knob.

ReelClean

#1
April 27, 2018, 09:44:02 PM
IIRC the Calcuttas 400 and 200 have  2 of 3x10x4 and the one pinned to the spool is 5x11x4.
Anyone confirm?
cheers
Steve
Specialist Daiwa reel service, including Magseal.

Jes301

#2
April 28, 2018, 12:36:57 AM Last Edit: April 28, 2018, 12:37:53 AM by Jes301
That plastic washer that pinned to the spool is what you talking about?

mikeysm

#3
April 28, 2018, 12:48:15 AM
Yes replace the plastic bushing with a bearing. There is a bushing under the gear sleeve. It can't be replaced without modifying it to fit a bearing. I reamed the hole to 8mm and installed a bearing. I also added a power handle.

Mike


mikeysm

#5
April 28, 2018, 06:44:15 PM
All you have to do is call boca and talk with them to be sure. They will answer your questions.

Mike
Print
Go Up Pages1
User actions