Sealine 400 Drag washers

Started by xaf, September 02, 2011, 08:50:53 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

xaf

September 02, 2011, 08:50:53 PM
Does anyone know where I can get drag washers to replace the original fiber drag washers on an older Daiwa Sealine 400?  ( I would prefer something other then the original fiber drag washers)  I checked with Dawn at Smooth Drag and they do not have them.

Bryan Young

#1
September 03, 2011, 04:07:42 AM
Do you know the size of the washers?  ID X OD X thickness.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

xaf

#2
September 03, 2011, 01:35:29 PM
Original fiber dra washers = I.D. is 14.3 mm, O.D. 28.00 mm, thickness is 2.00 mm.   Drag stack height is 16 mm with 3 fiber washers, 2 thin and 1 thick metal washers.  I figure if I could find the right I.D & O.D., I might be able to add an extra drag washer and metal washer to adjust to the correct height.
Print
Go Up Pages1
User actions