Penn 250

Started by shootera3, November 19, 2011, 07:53:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

shootera3

November 19, 2011, 07:53:35 PM
I have a Penn 250 with he one screw take-down on side plate.the screw is loosened, but unable to remove plate. Sprayed wd40 on it, still unable to take off. Alan, can you help me.

Alto Mare

#1
November 19, 2011, 08:01:06 PM
Did you twist the plate about a quater of a turn?
Forget about all the reasons why something may not work. You only need to find one good reason why it will.

Dominick

#2
November 19, 2011, 08:12:02 PM
Pull out the pin and wrap a piece of string around it to keep it from engaging.  Then put some torque on it counter-clockwise.  It should turn about a 1/4 inch.  Good luck.  Dominick
Leave the gun.  Take the cannolis.

There are two things I don't like about fishing.  Getting up early in the morning and boats.  The rest of it is fun.

alantani

#3
November 19, 2011, 08:54:35 PM
soak it in something, wd-40, anything, overnight and come back to it tomorrow.  you don't want to break anything.  there are no replacement parts for this reel......   :-\
send me an email at alantani@yahoo.com for questions!

shootera3

#4
November 19, 2011, 10:01:52 PM
You guys straightened me out, I was turninh clock wise. Thanks.
Print
Go Up Pages1
User actions