Penn VIS 130

Started by Noahg727, July 31, 2020, 01:26:24 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Noahg727

July 31, 2020, 01:26:24 PM
So Iv sent me Penn VIS 130 off to be painted. The man doing it is having issues removing the plastic housing attached to the spool. And suggestions on how to get it off? Here's a picture:

Bryan Young

#1
July 31, 2020, 01:38:17 PM
There should be a little lock pin that is secured to a little lever. Lift the lever then turn the drag plate cover. It looks like the lever is missing on the drag plate cover. If that's the case, you would likely have to break/cut the cover.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

Penn

#2
July 31, 2020, 01:59:59 PM Last Edit: August 02, 2020, 01:34:32 PM by Penn
He most likely popped the clip off rather than lifting the tab.  If the pin is sticking up high enough you grab it with needle nose pliers and twist the cover off, otherwise as Bryan stated the cover needs to be cut off.

tony

Noahg727

#3
July 31, 2020, 04:28:53 PM
Thanks guys- helped a bunch
Print
Go Up Pages1
User actions