Drag clicker pin and spring repair on star drag for shimano curado 100d or MG50

[stl fishguy]

Could someone help me understand how to repair the drag clicker pin and spring on the drag star for a curado 100d or chronarch 50mg. The pin has come out and I am not sure how to replace and keep it in place.

[Nessie Hunter]

Saw your other post and responded...
This one explains the problem better......

http://alantani.com/index.php?topic=3435.0

what you have to do is put the star drag on tight, all the way down on the NUT (ready for handle assembly), then insert the spring, then Bullet clicker ~ & place the Plastic washer on top to hold it all in place (make sure serrated side is on clicker) ~ While you install the handle assembly & hold it all down at the same time.

Need 3 or 4 hands & a foot, but youll get it with a few attempts/tries...  

Many times the spring is short enough that just setting the Plastic washer on it will keep it all together while you put the handle on...

When your done & can do it easily.. Brain Surgery will be an easy task...   



.

[stl fishguy]

Thank you, I'll give it a try.

[coastalobsession]

Make sure you still have he clicker mechanism, you can loose that part easily.