Shimano Calais CL200APV Tutorial

[steelhead_killer]

Looked up this reel on the site and the photo's are long gone.  Anyone offer some advice on removing the head plate on this little reel?  A Photo would be magical...

Thanks!

Andy

[alantani]

crud, i can't remember and i haven't seen one of these in a long time. 

https://www.jollypesca.net/ricambi-shimano-2016/reels/low-profile/calais-cl200apv.html

[alantani]

from the schematic, it looks like the left side plate unscrews.  once the spool is removed, it looks like there are screws that hold the right side plate on.  these screws should be visible/accessible once the spool is removed. 

[steelhead_killer]

Three screws under the spool removed no budge.  Removed top cover and removed c clip on cross bar.  Still nada.   

[alantani]

it looks like there are four.  there are three 2158's and a 1636.

[handi2]

Look for a hidden one by the level wind worm gear

[steelhead_killer]

Look for a hidden one by the level wind worm gear

Sneaky one that is impossible to reach.