grinding noise after changing gears

Started by phishxxii, October 13, 2022, 09:59:37 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

phishxxii

October 13, 2022, 09:59:37 PM
I have a Penn slammer 3 6500 that is grinding when retrieving. I changed the main and pinion gear and thought the problem was done.When I turned the rotor everything was like new. However ,when I put the handle on and turned the handle the reel sounded like a coffee grinder. There is only 1 shim on the main gear. I put the handle on the other side and the same problem occured. Could it be the side plate bearings that are causing the problem?

oldmanjoe

#1
October 13, 2022, 11:59:46 PM
 It would be worth cleaning them out , once you pull them out you might feel it rite away .
Grandpa`s words of wisdom......Joey that thing between your shoulders is not a hat rack.....    use it.....
A mind is like a parachute, it only work`s  when it is open.......
The power of Observation   , It`s all about the Details ..
 Forget about all the reasons why something may not work. You only need to find one good reason why it will.   Alto Mare

phishxxii

#2
October 14, 2022, 05:22:35 PM
Turns out the gears weren`t meshing properly.Added more shims to rectify the problem.
Print
Go Up Pages1
User actions