Daiwa 27H drag upgrade

[edjal]

Does any one know which size Penn HT100s drag washers would be used to replace Stock Daiwa 27h drag washers?   Thanks in advance

[akfish]

It takes three 006 155, the same drag washers that work in a Penn 209 or Penn 155.

[edjal]

Thanks AKAfish your help is appreciated. Do you recommend the stock washer under main drag gear?

[akfish]

I don't now a Penn washer that will fit. You could use a 006 155 if you trimmed it down or just go with the stock. That's what I usually do. For a 20# class reel, you get enough drag with the HT-100s.

[edjal]

Thanks again AKFish I am going to order up the 6-155 washers.   Edjal

[edjal]

  I have installed them and they appear to be great.  True test this summer landing 30lb plus stripers.

[alantani]

i forget, you have drag grease, right?

[edjal]

Yes I have and used some cals grease.  Thanks for asking