Torium 14 first gen rebuild woes

[Kauaiboy]

Aloha,
Everyone new to the forum . Just aquired a first gen torium 14. She is rough but took her apart and cleaned her up . Ran in to some issues of course 1st off having troudle reinstalling the drive shaft e clip any tips? 2nd is the anti reverse bearing was rusted outer bearing housing seprated from inner bearing. Outer bearing housing is stuck in reel side plate how do I remove. Thanks

[handi2]

Did you used to live in Pensacola?

Keith

[Kauaiboy]

Did you used to live in Pensacola?

Keith

No Im out in Hawaii

[Bryan Young]

Aloha,
Everyone new to the forum . Just aquired a first gen torium 14. She is rough but took her apart and cleaned her up . Ran in to some issues of course 1st off having troudle reinstalling the drive shaft e clip any tips? 2nd is the anti reverse bearing was rusted outer bearing housing seprated from inner bearing. Outer bearing housing is stuck in reel side plate how do I remove. Thanks

E-Clip - are you referring to the clicker side of the spool?  If so, I find that the e-clip goes on easier by flipping the clicker gear.  One direction is easier than the other.  It will not make a difference to the clicker pawl coming in contact with the clicker gear.

Anti-Reverse Bearing Housing - I find a deep socket that just fits in the opening that houses the AR bearing.  I lubricate the outer edges of the bearing housing and let it sit for a few minutes.  Place the side plate on a flat, solid surface.  Place the deep socket on the AR Bearing housing.  With a dead blow hammer (because that is what I have), I tap the socket until the AR Bearing housing drops out.

[handi2]

A 10mm will fit the ar bearing. If it will move with the guts out.

The clip for the main shaft has a washer that goes on first them the clip. It will only go on one way

Keith

[Kauaiboy]

Aloha,
Everyone new to the forum . Just aquired a first gen torium 14. She is rough but took her apart and cleaned her up . Ran in to some issues of course 1st off having troudle reinstalling the drive shaft e clip any tips? 2nd is the anti reverse bearing was rusted outer bearing housing seprated from inner bearing. Outer bearing housing is stuck in reel side plate how do I remove. Thanks

E-Clip - are you referring to the clicker side of the spool?  If so, I find that the e-clip goes on easier by flipping the clicker gear.  One direction is easier than the other.  It will not make a difference to the clicker pawl coming in contact with the clicker gear.

Anti-Reverse Bearing Housing - I find a deep socket that just fits in the opening that houses the AR bearing.  I lubricate the outer edges of the bearing housing and let it sit for a few minutes.  Place the side plate on a flat, solid surface.  Place the deep socket on the AR Bearing housing.  With a dead blow hammer (because that is what I have), I tap the socket until the AR Bearing housing drops out.

Sorry the eclip on the drive shaft having problems reinstallinglooking to see if there is any rechqunie. As far as the aintreverse bearing goes. Socket mwould work if the guts of the bearing was intact. Having trougle removing outer part of anti reverse bearing housing

[ReelClean]

Any help?
https://alantani.com/index.php?topic=1654.msg132864#msg132864

[Kauaiboy]

Any help?
https://alantani.com/index.php?topic=1654.msg132864#msg132864

Thanx will look into that. Also still open for anymore suggestions from other folks also

[alantani]

https://alantani.com/index.php?topic=36089.0

[Kauaiboy]

https://alantani.com/index.php?topic=36089.0

Thanx used the concrete expansion bolt today worked like a charm. any tips on reinstalling the drivreshaft eclip? suckers giving me fits

[alantani]

https://www.mcmaster.com/c-clip-tools/

E- and C-Style Side-Mount Retaining
Ring Installation and Removal Tools



E-Style Ring

C-Style Ring

External Ring
A spring on one end of the tool holds the retaining ring in position for installation and a hook on the other end is for removal.

Overall
For Rings that Fit OD   For Ring Thick.   Lg.   Wd.   Thick.       Each
For External Retaining Rings
5/32"-3" (4-76 mm)   0.025"-0.093" (0.635-2.362 mm)   6 3/4"   9/32"   1/16"   5728A2   $24.33
Retaining Ring Installation and Removal Tool, E- and C-Style, Side-Mount
Each
ADD TO ORDER
In stock
Product Detail

[Mrc70]

I just had the same issue trying to reinstall the e-clip on my TLD 15/30. Took me forever, wish I knew about that tool!