Heddon Schematics for Spinning and Nos. 120 & 150 Spin Casting Reels Booklet

[sandbar]

Good Afternoon,
Schematics and Instructions for Heddon:
120
150
295
290
250
270R/L
260R/L
210R/L
245
230
280
205R/L
220R/L
235
I listed the Model Numbers so those using the Search box could find this.
At least, that's the plan.
I hope this is useful.
-Steve

[sandbar]

Here it is all in one pdf.

-Steve

[happyhooker]

Super to have this.  Heddon stuff (docs) seem to be hard to come by, so any addition to the "library" is always welcome.  Thanks for taking the time to get this up.

Frank

[sandbar]

You're welcome Frank.
I know there are more models that are not covered in this booklet.
 Gonna keep an eye out for more literature like this and will post it when I come across some.

-Steve

[sandbar]

I found an old yellowed one sheet fold out that folds down to about a 3-1/2" x 5" size.
There were 7 spinning reels that were not on the first document that I posted. There are also conventional and spin cast reels on the foldout.

It is hard to keep the sharpness when the print starts out so small. I apologize for the fuzziness.
If I learn a way to correct it, I will.

[sandbar]

Heddon
215
234
236
246
251
252
290

and a PDF of all combined.

Thanks.

-Steve

[sandbar]

The PDF

[Jack Navarra]

Hello all, I'm trying to reassemble a Heddon 234 and can't figure out how to load the spring under the bail stop, for more than an hour now I've tried. Any trick to getting it in? Thanks Jack

[Gfish]

I have a 283. Large FW, small-medium SW size. Very nice reel. Says; "ASSEMBLED IN U.S.A. BY DAISY @ HEDDON  PARTS MADE IN JAPAN'' \on the stand. Maybe it came along latter?

[sandbar]

Hello all, I'm trying to reassemble a Heddon 234 and can't figure out how to load the spring under the bail stop, for more than an hour now I've tried. Any trick to getting it in? Thanks Jack

PICTURES HELP