Penn Generation V75 schematics

[Donnyboat]

Hi all as above, I am trying to get the schematics for the above reel, as you may guess, the bearing in the tail plate, is very hard to get to, or remove, thought I had it worked out by drilling  away the plastic behind the bearing then punching it out, but I did not have enough of the plastic remove, when I tapped it  , or should I say tried to belt it out the plastic broke away, I went into the mystic parts sight, but did not have any luck finding the schematics, hopefully some one has a copy, cheers Don. &  thanks.

[Donnyboat]

I have learnt, that Jarvis walker made these reels for Penn, they sent me a copy of the schmatics but they must be of the wrong reel, as the schematics do not show the two plastic parts inside the tail plate, the first part is what holds the retaining button in the tail plate that part has 3 screws in it, the second peice of plastic, is the one I am after, it has two screw holes in it & also holds the bearing in place, cheers Don.