113HL Right Side Plate

[Keta]

One other thing to think about. The last, big thick washer that goes with the big hole reels is no longer available. In fact, I can't find any part info or schematic on those reels.

That piece can be easily made and an O ring grove won't add that much work.

[day0ne]

That piece can be easily made and an O ring grove won't add that much work.

The one I have doesn't have an o-ring. It has a rubber flap a little over 1/4 inch wide that covers the hole

[Alto Mare]

I believe you got something unique there DayOne, I sertainly never seen one. Thanks for showing it.

[Irish Jigger]

Part number?

[day0ne]

No part number. It is engraved "4/0"

[mizmo67]

Based on the old notes we found for the 9/0, on the 4/0 that washer/cap would be the 136-113H. That and the 140-113H washer that goes underneath it would be unique part numbers that are part of the outside drag design.

I've never actually seen one that looked like that though, I'm not sure it's Penn's original part. It looks more modern. Someone might have machined up a replacement.