Husqvarna Batteries

Started by Bill B, Today at 02:35:46 AM

Previous topic - Next topic

MACflyer, jgp12000, Bill B and 2 Guests are viewing this topic.

Bill B

I inherited a Husqvaarna battery operated tool system, chainsaw, leaf blower, and string trimmer.  3 tools, 3 batteries.  The history of these batteries is suspect.  Kept in an unheated garage with temps into the high 30's. 

All batteries will charge to "full" with no error code on the charger. But, and there is always a but, when used, all batteries will fail (tool stops working) after 4-5 minutes uses of use.  When I slap another battery in the same result.  But, 😩, after sitting a few minutes, 5-10 minutes,  the battery will run at full speed, for 4-5 minutes and fail again.

I'm assuming the batteries are toast.  Yes/No?  If they are toast, any resource to have them rebuilt?

Bill
It may not be very productive,
but it's sure going to be interesting!

alantani

send me an email at alantani@yahoo.com for questions!

Keta

Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain

Swami805

We've been using those saws at work for a few years and the batteries have held up well. Some chargers have crapped out. Something is wrong with your batteries or maybe the chargers have gone wonky
Do what you can with that you have where you are

Bill B

It may not be very productive,
but it's sure going to be interesting!

Keta

Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain