SS Belleville Washer Source

[Keta]

I'm looking for some SS Bellville washers and the only sourse I've found so far wants over $30.00 to ship 4 of them, I will not pay that much for something I ship for less than $1.00.  Does anyone know where I can get a small quanity of Stainless Bellvilles, ID, .50", OD 1.25" for a reasonable price?

[Bryan Young]

Hi Lee,

What is the height and thickness that you need? 

Bryan

[john2244]

Lee,
What reel does that fit ??  I may have some you can have.  Also, how many do you want ??

John

[Keta]

Bryan,
Around .050" and .035" thick and around .70" tall.

OD 28mm ID 14.2mm,  Height 1.8mm
1.5mm and .8mm thick

I can grind the OD if needed.

John,
They are for the 349H.
I'm looking for 5 but one or two would let me see if they help flaten the drag curve on the 5+1 conversion.  I have one in now that is 113H size and it helped.

[john2244]

Lee,

Sorry, no luck on the washers.
John

[Ken_D]

Alan's got it covered below.

[alantani]

lee, the washers i use for the penn 113h is 0.525 ht x 0.975 od x 0.035 th x 0.065 ht.  got a bunch if you need them. 

[bluefish69]

Did you try McMaster & Car? I bought bevel SS washers [small ones ] from them

[alantani]

i bagged up four and will ship them out for you to look at.