Ocea jigger spool corrosion

[Projectd]

Need some help, my ocea jigger 5000p, spool is corroded. As a result, there is a couple of small hole. Anyway to patch up or is there any after market spool which I can get? Thk u

[conchydong]

I am not 100% sure but a Trinidad or Torium 50 spool may be the same. I'd call Shimano and verify.
The OJ's have the spool lock feature, and I am not sure how that works as far as the actual spool is concerned but it is worth a try.

[Projectd]

Mayb I will call up the local dealer in singapore to get some ans. It is a chore wif such corrosion, almost wif many shimano reel tat I know. Thk.

Wander if there is anyway to patch it up n save me some cost!

[alantani]

just add a little grease.  that should slow it down.  once corrosion starts, you can never get rid of it. 

[Projectd]

Am I able to get some metal filler, patch up the tiny hole, file it to smoothness and add some paint on it?

[alantani]

yes, but honestly some grease will do just as well......   

[Projectd]

Alrite tani... Thk for the advise.

[Irish Jigger]

Had a similar corrosion problem on a Trinidad spool. Cleaned the corrosion from around the hole and filled it with two pack epoxy (Araldite Rapid) smoothed off with a wet finger!
Greased per Alan's recommendations and it's still good three years later.