WHat do I have? SMooth drags in this 113h?

Started by Joel.B, October 04, 2012, 10:24:49 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Joel.B

I just took apart a 113h I just bought- has been hot-rodded a bit with marrow frame and hi-speed stainless gears.  There was a small washer under main gear- and there are 5 reddish drag washers that are very hard and brittle feeling, almost ceramic.  Are these a smooth drag product?  They are dry, no grease. 


Any reason I should not stick with these?

redsetta

G'day Joel,
They sound like Smooth Drag's Extreme Smoothies.
There's a bit about 'em here: http://alantani.com/index.php?topic=4777.0
Hope that helps.
Cheers, Justin
Fortitudine vincimus - By endurance we conquer

Dawn

Does sound like Xtreme Smoothies.  If they are working okay, you can just wait until you wear them out   ;)
Usually they are used dry, but a very light coating of grease is okay too.

Dawn
Dawn