Penn 54gs stil rubbing

Started by Bunnlevel Sharker, October 23, 2012, 11:29:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Bunnlevel Sharker

October 23, 2012, 11:29:02 PM
Im having the same problem as before. I think the spool might even be rubbing against the frame. Any suggestions on what to do?
Grayson Lanier

George4741

#1
October 24, 2012, 01:30:46 PM
Hmmm, graphite frame, right?  In his Charter Special tutorial, Alan uses a dremel to enlarge the frame where it rubs against the spool.  Is this feasable for your reel?
  George   
viurem lliures o morirem

Bunnlevel Sharker

#2
October 25, 2012, 01:28:40 AM
Ive got a spare frame, and im willin to try it
Grayson Lanier

alantani

#3
October 25, 2012, 08:56:27 AM
back off all the side plate screws by a full turn and see if it goes away.
send me an email at alantani@yahoo.com for questions!

Alto Mare

#4
October 26, 2012, 11:54:14 PM
Graphite frames ::)
Forget about all the reasons why something may not work. You only need to find one good reason why it will.

Bunnlevel Sharker

#5
October 31, 2012, 12:39:46 AM
Quote from: Alto Mare on October 26, 2012, 11:54:14 PM
Graphite frames ::)
I wish that they made an aluminum frame for it, i would buy ne right up. As of know, its looking line m gonna have to buy a new frame as the thing one of the side plate screws goes into first popped out then shredded >:(
Grayson Lanier
Print
Go Up Pages1
User actions