SS Dog Priority

[Keta]

I have 15-500 (500, 501), 15-309 (309, 112H), 15-200 (100, 150, 200) and 15-99 (99, 60, 65, 66, 68, 111, 112, 113, 285) dogs drawn up, they use the same material.

When I get some SS in .080 what dogs should I have cut first.
I'm thinking, 15-500 first, then 15-309 and 15-200 with the 15-99 last.

[alantani]

can you work with sheets that are 12 inches x 12 inches?

[john2244]

Hello Lee,

When the dogs are available I would like to place an order for the 15-500 and 15-99.

John

[Keta]

can you work with sheets that are 12 inches x 12 inches?

Yes

Hello Lee,

When the dogs are available I would like to place an order for the 15-500 and 15-99.

John

Ok

[Alto Mare]

You could probably do a run of all three and make everyone happy. About the 15-140,  if you get them going as well, were they going to drill them?

[Keta]

Not sure, I need a squidder or a 15-140 to measure.

[john2244]

Lee,

If you don't get a 15-140 in the next few days let me know.  I will take one of my squidder apart and send you the dog.

John

[Alto Mare]

Lee,

If you don't get a 15-140 in the next few days let me know.  I will take one of my squidder apart and send you the dog.

John

John, don't take that Squidder apart, I think I found one

Lee, let me know if you need it and I'll send it right out.

[Keta]

Send it and I"ll get it drawn up and cut.

[alantani]

show off.......   

[redsetta]

show off.......   

[Alto Mare]

show off.......   

At the rate Lee is going, these will all be trash soon 

[john2244]

OK Sal,  I think you might have one !!!

[Keta]

500, 99, 309 then 200?  The 15-140 will be done as soon as I get one to measure and material is here.

[Ron Jones]

Will 2 112Hs work to double dog a 112h? or do you need a different second dog?

Anyways, put me on the list to end up with a double dogged 112h and 4 dogs for 66s.

Ron