DONE Need help with click pawl for TLD25

[JoMa]

Could someone, please, take a measure for me of the click pawl (TLD No 0051 in schematics) for the TLD25 (overall length, width, etc..)? I know that the hole is 3 mm in diameter, and the upper part is 7 mm in diameter, but I don't know the rest.
I need to make one, because it's too hard to get one here in Croatia.

Regards,

Josip

[alantani]

i should have these parts. if i can get your address, i can send them out.  i am sending parts out to hrvoje in zagreb today.

[Bryan Young]

Are you referring to the silver part?

http://www.yourfishpictures.com/data/500/medium/103_0745.JPG

I may have one.  what is the part number and I'll check it when I get home tonight.

[JoMa]

Are you referring to the silver part?

http://www.yourfishpictures.com/data/500/medium/103_0745.JPG

I may have one.  what is the part number and I'll check it when I get home tonight.

Of course, it's the click pawl. The part number is 0051

i should have these parts. if i can get your address, i can send them out.  i am sending parts out to hrvoje in zagreb today.

Thank you Alan. I'll send you a PM with my address.

[alantani]

how about the other parts of the clicker assembly.  did you need any of those? 

http://fish.shimano.com/media/fishing/techdocs/en/TLD25_v1_m56577569830498887.pdf

[JoMa]

No, I don't need anything else. The only thing missing is the click pawl

[alantani]

got it!  i will try to get it in the mail on monday. 

[JoMa]

Great! Thank you very much!