Calcutta 300te

[bochixter]

I just recently bought a used calcutta 300te
But notice that as I was casting it the level wind makes
Some noise. Is that normal or is there something wrong
With the reel. I will appreciate any help or info on it
And thanks again guys

[alantani]

usually that means a bad bearing, or two......

[bochixter]

usually that means a bad bearing, or two......

Nice. What bearings and will u recommend Alan??
I what to use if for live bait in the Inshore for halibut
And for trowing big plastics.
Iam also thinking on replacing the drag? Any recommendation ??
Thanks

[alantani]

smoothdrag.com has the drag washers, and probably the bearings too, but check the bearings in the reel and see which ones are bad.  if they are rough at all, they should be replaced. 

[bochixter]

smoothdrag.com has the drag washers, and probably the bearings too, but check the bearings in the reel and see which ones are bad.  if they are rough at all, they should be replaced. 

Ok I will look into it and thanks