Older 112/114's Screws and Washers

[Ken_D]

From another forum: Our man is asking:

Questions:

1. Will the HT100's fit the older 112, 114?  What numbers should I look for?

2. I need a reel foot screw for the 114 and the schmatic I'm eyeballing shows
right side and left side screws. I need the shorter screw. Which is ?

3. One of the 114's had a tension washer under the handle the other did not, I dont see the number. (NOT the one under the drag star, have both of those)

Thank you, Con

And thank ~you~ folks..  Kenneth A. D.

[Cone]

The left side stand screws should be the shortest. https://www.mysticparts.com/PennParts/Parts/32-20.aspx
Tension washer https://www.mysticparts.com/PennParts/Parts/8-114.aspx
Yes the HT 100's can be used in the older reels. You may have to have the metal washers too. If so it may be better to buy the kits with metals.
HTH Bob


"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"

[Keta]

1. 112, 6-113
    114, 6-114

2. 32-20

3. 8-114 (thin) or 8-115 (thick)

[Ken_D]

Rodger that, Gents, Thanks a tonne. Appreciated.  Con down in Carolina will also appreciate the answers.  KD