Penn Mag 10

[Jason Y]

I am working on a couple of Penn Mag 10's

I ordered some new bearings from a reputable source. They said it was the same end bearings as a Squidder.
It's not, no big deal I will just order the right ones , can anyone help with the correct bearing size?

The ones I received are .125x.500x .1719

The bearing I removed are smaller OD

Thanks
JY

[Jason Y]

Checkes out a link to Nutter Rod and Reel service printed out parts list.
Looks like the bearings are the same as 113H bearings.

P/N 055-113H and 026-113H

[Irish Jigger]

113H bearings are .125 x .375 x .1562  (1/8"x 3/8"x 5/32".)

[Jason Y]

Thank You, I had ordered some 113h bearings today. Assuming that the P/N with 113h at the end meant that the 113 and mag 10 used the same bearing.

To further check I looked at smooth drags site and saw that 113h and 505hs shared a common bearing. Test fit a bearing from my 505 in mag 10 seems to work.