Mitchell 300 Pro Side Plate Screws stripped

Started by Conor1000, November 26, 2025, 09:34:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Conor1000

I bought an unused 300 Pro from the `Bay. I cleaned it up, not that it needed a lot of work; the grease was fine. I did notice that one of the side plate screws was slightly damaged and when I went to screw it back in, as carefully as I could, I stripped it. These are Philip head screws. A search on the `Bay, is showing prices between 5 and 10 Dollars, but the shipping to Switzerland is 22 Dollars. Is it really that much? Can anybody recommend a shop or dealer where I can buy them without getting hosed on shipping? Otherwise; I am going to buy a similar reel for parts! Many thanks in advance. Conor


Swami805

Shipping to Switzerland will be difficult and expensive. Might try to find a specialty fastener shop closer to home. Maybe bring one with you so you can try to match it
Do what you can with that you have where you are


oc1


Conor1000

Thank you for the replies and the suggestions.