Clicker Adjustments??

[evanb84]

I have a squall 12 and a gti310 is there anyway to lighten the clicker on these reels? It takes a good amount of pull to get the clicker going on them.
thanks!
Evan

[alantani]

here is the schematic for the squall https://www.mysticparts.com/Assets/images/pennparts/schematics/sql12.pdf

and for the 31 gti.  https://www.mysticparts.com/Assets/images/pennparts/schematics/310gt.pdf

there are two clicker springs (key #62a).  you would literally have to go in and cut a coil off the springs. i've never done this before, so i do not know what the results would be.  i would order 2-3 sets of extra springs from mysticparts.com before you start cutting, in case you cut too much.  


"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"

[alantani]

oh, and welcome!!!!!!!! 

[evanb84]

oh, and welcome!!!!!!!! 

Thank you so very much!...I will let you know how this works out

[evanb84]

here is the schematic for the squall https://www.mysticparts.com/Assetsmages/pennparts/schematics/sql12.pdf

and for the 31 gti.  https://www.mysticparts.com/Assets/images/pennparts/schematics/310gt.pdf

there are two clicker springs (key #62a).  you would literally have to go in and cut a coil off the springs. i've never done this before, so i do not know what the results would be.  i would order 2-3 sets of extra springs from mysticparts.com before you start cutting, in case you cut too much.  

The Springs came in for the squall and 310 both were super easy to cut.  Only took one try to get them where I needed them to be.
Thanks again for the help!

"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"