Accurate BX2-600N Bearing Sizes?

[EvoX]

Looking to replace the bearings number #16 and #82 on my Accurate BX2-600N.  Will appreciate
if anyone have information on the sizes so that I can place an order through the net.  Thanks.

[redsetta]

G'day and welcome EvoX,
Types and sizes as follows:

• Left side plate/spool/knob: SR3-ZZ (ID 0.1875in x OD 0.5000in x Width 0.1960in)
• Right side plate: SMR697-ZZ (ID 7mm x OD 17mm x Width 5mm)

Try Boca, here: http://www.bocabearings.com/search.aspx?SearchType=StartModel&ProductGroupID=5&MFGSYSID=791&ModelName=BOSS&Feature=SINGLE%20and%202%20SPEED
Hope that's what you were after.
Cheers, Justin

[EvoX]

G'day and welcome EvoX,
Types and sizes as follows:

• Left side plate/spool/knob: SR3-ZZ (ID 0.1875in x OD 0.5000in x Width 0.1960in)
• Right side plate: SMR697-ZZ (ID 7mm x OD 17mm x Width 5mm)

Try Boca, here: http://www.bocabearings.com/search.aspx?SearchType=StartModel&ProductGroupID=5&MFGSYSID=791&ModelName=BOSS&Feature=SINGLE%20and%202%20SPEED
Hope that's what you were after.
Cheers, Justin

Thank you Justin.

Cheers, Wei.

[EvoX]

Hi Justin or anyone helping, what's the size for the spool bearings?  Was thinking since going to place an order,
might as well tag them with the order.

[redsetta]

G'day Wei,
It's the same as the handle bearing:

• Left side plate/spool/knob: SR3-ZZ (ID 0.1875in x OD 0.5000in x Width 0.1960in

I believe there's four of these in the 600.
Cheers, Justin

[EvoX]

Thanks again, Justin

Wei