16S dimentions needed

Keta · August 22, 2013, 03:28:09 AM

I need the hole or shaft dimensions for a 16S.

Cortez_Conversions · August 22, 2013, 04:12:14 AM

Mine measures A=.360 x B=.310 with calipers.

Cheers

George4741 · August 22, 2013, 04:25:29 AM

An odd size, between the jigmaster and 113H.

You would think Penn would have made it to one of their standard sizes.

Keta · August 22, 2013, 11:16:03 AM

Quote from: Cortez_Conversions on August 22, 2013, 04:12:14 AM
Mine measures A=.360 x B=.310 with calipers.

Cheers

Thank you, was that the OD of the shaft or the ID of the arm?

Cortez_Conversions · August 22, 2013, 11:14:27 PM

Quote from: Keta on August 22, 2013, 11:16:03 AM
Quote from: Cortez_Conversions on August 22, 2013, 04:12:14 AM
Mine measures A=.360 x B=.310 with calipers.

Cheers

Thank you, was that the OD of the shaft or the ID of the arm?

That was the ID of the arm.

Keta · August 23, 2013, 01:19:45 AM

Thank you v.ii

turboal · August 26, 2013, 03:24:42 PM

here is a pic of the nut and the reel. Cal installed Tiburon open top frame

Keta · August 26, 2013, 03:37:02 PM

It looks like a Penn handle wrench fits, small or large?

turboal · August 26, 2013, 07:37:48 PM

it's the one in the middle. i guess it's the small spline

Keta · August 26, 2013, 07:41:21 PM

Drawing being finished now.