505 narrow

Started by broschro, September 16, 2013, 06:30:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

broschro

September 16, 2013, 06:30:23 PM Last Edit: September 16, 2013, 07:17:06 PM by broschro
what aluminum spool do I need to make this a narrow real ??? I have a small one but it looks too small and the shaft length is different.

Ron Jones

#1
September 16, 2013, 07:21:53 PM
You will need a 506 spool. I do not believe they are all that common.
Ron
Ronald Jones
To those who have gone to sea and returned and to those who have gone to sea and will never return
"

broschro

#2
September 16, 2013, 08:15:03 PM
ok i have one for the 500 i think i need one for the 506 or will sell this one for 35 with shipping.

DaBigOno

#3
September 17, 2013, 01:05:23 PM
Maybe you can find a Tiburon P21S-HS that would work.   
Ua Mau ke Ea o ka Aina i ka Pono

intili

#4
September 17, 2013, 03:02:25 PM
I did this conversion a few years ago, penn 506HS stand, spacer bars and spool is all you need. Call Dan at Wichester Bay, he is reely gone on ebay and internet, great guy!

broschro

#5
September 28, 2013, 02:52:07 PM
Quote from: broschro on September 16, 2013, 08:15:03 PM
ok i have one for the 500 i think i need one for the 506 or will sell this one for 35 with shipping.
what reel dose this spool fit? are the 506 and the 501 the same width?
                                               
                                   Thanks Jamie

Keta

#6
September 28, 2013, 03:20:22 PM
Quote from: broschro on September 28, 2013, 02:52:07 PM
are the 506 and the 501 the same width?
                                               
                                   Thanks Jamie

Yes, they both use the 30-49 stand and 37A-506 spacer bars.
Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain

Alto Mare

#7
September 28, 2013, 04:03:42 PM
Same width, different shaft.
Forget about all the reasons why something may not work. You only need to find one good reason why it will.

broschro

#8
September 28, 2013, 07:48:46 PM Last Edit: September 28, 2013, 07:50:10 PM by broschro
is this spool a 501? it has the short shaft.dose not fit my 505.

Alto Mare

#9
September 28, 2013, 07:54:54 PM
501= 16.5mm
505= 18.5mm
Forget about all the reasons why something may not work. You only need to find one good reason why it will.

broschro

#10
September 28, 2013, 08:05:02 PM
thanks Sal.

broschro

#11
September 28, 2013, 11:03:05 PM
is the 99 the same width as the 501 506.I have a set of bars, seat and clamp but i do not know what they r for.they r a bit wider thene the spool in the pics.more narrow thene the standerd 505.

Keta

#12
September 29, 2013, 01:08:25 AM
The 99 is half way between the 500 (505) and 501 (506)
Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain

George4741

#13
September 29, 2013, 02:54:12 AM
Quote from: broschro on September 28, 2013, 11:03:05 PM
is the 99 the same width as the 501 506.I have a set of bars, seat and clamp but i do not know what they r for.they r a bit wider thene the spool in the pics.more narrow thene the standerd 505.

My Accurate "99" frame is 2.125" wide and the spool is 2.210"
  George
viurem lliures o morirem
Print
Go Up Pages1
User actions