Boca bearings for 506? Better freespool?

Started by Joel.B, September 21, 2013, 05:00:49 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Joel.B

September 21, 2013, 05:00:49 PM
Will the Boca bearings give the 506 better freespool?  Is there another bearing that should be considered?

alantani

#1
September 21, 2013, 08:36:29 PM Last Edit: August 09, 2018, 05:56:49 PM by mizmo67
no.  first, clean out the bearings that you have, lube them with tsi 321 (now available from mysticparts.com, btw) and give it a try.  make sure you also clean out the pinion gear.  
send me an email at alantani@yahoo.com for questions!

Joel.B

#2
September 21, 2013, 09:13:41 PM Last Edit: August 09, 2018, 05:56:57 PM by mizmo67
Quote from: alantani on September 21, 2013, 08:36:29 PM
no.  first, clean out the bearings that you have, lube them with tsi 321 (now available from mysticparts.com, btw) and give it a try.  make sure you also clean out the pinion gear.  

Thanks Alan.  I polished inside of pinion and the related area of spool shaft- freespool is actually really good.  Doing a special reel and wondered if there was anything to be gained from the aftermarket bearings.   I'll order up some of the TSI superlube

Print
Go Up Pages1
User actions