Hex key to remove a set screw on a Stradic 6000FG

[drichitt]

I have a Stadic 6000FG that I want to completely service. There is a set screw (Index #6208) that holds the oscilating slider (#6556) onto the main shaft. A retaining screw is used as well but that is not my concern. My problem is the set screw. It appears to be a hex type set screw but the hex key required is very tiny. Can anyone tell me what size hex key is needed....Thanks

[Clem]

Hey pal, that will be .9mm. Handy to have that size as Shimano used it a lot on retaining screws...line roller assy etc

[drichitt]

Thanks. I have plenty of hex keys that are slightly larger, but a .9mm has got to be about as small as they come, I would assume.

[Clem]

When I purchased the pack it also came with a .7mm...it's tiny, have no idea what I'll use it on

[drichitt]

Getting ready to order a set from Amazon. Includes .7, .9, 1.3, 1.5 & 2.0mm. $7.21 shipped.
Thank you for your help.
Don

[philaroman]

if you don't mail-order, check computer stores -- small components (e.g., lap-top hard-drives) are held together w/ some mighty small metric hex screws