505hs cupped washer

[Clipper]

Bought a NIB 505. Worked well out of box, but tore it down to grease etc as I do with all new reels.  After greasing drag stack with Cal's and reassembling, it worked fine except that when star is backed all the way out (ie no drag) spool still turns with some drag, which it didn't do before. My thinking is that the grease takes up some space or that the cupped washer is upside down. 

Which way does the cupped washer go?  Or is it something else?

[Frank]

Hope this makes sense. Drag stack ) spacer sleeve, star.

) = Cupped washer

[Clipper]

Sure does, that's how I figured it went.  'Preciate it.

[BMITCH]

Clipper, you would be correct with the grease displacing some of the drag stack. That all get straightened out on a good fish though

Bob

[Clipper]

Thanks for replying, glad i asked before tearing it down again.  Have a Happy...!

[Bryan Young]

Whenever you have greased drag washers there will be a small amount of drag because everything sicks slightly together.