Shimano Talica 8 II Bearings

[Drisse]

Hi !

I cleaned my Shimano Talica 8 II the other day. Measured the bearings, just to have the measurment on paper. Measured with both my digital and regular vernier caliper.
Started to doubt on my measurment when the measure was closer to for example 5,9 than 6 mm . I don't always like the digital vernier caliper, but even on the manual
som of the measure was closer to ,9 . But Shimano doesn't have inch bearings, or..... ?

I wrote the measures in mm, but just want to check if its right ?

Drive shaft 10x19x5 mm x 2 bearings
Pinion          7x17x5 mm x 1 bearing
Spool right   5x11x4 mm x 2 bearings
Spool left     6x15x5 mm x 1 bearing