old Penn 114H with older sideplate

[themadog]

I have an old Penn 114H with the older side plate that where the crank comes out is much larger than the new side plates.  Is there any way that I can convert and use the new side plate on this older Penn?
I dropped the reel on the deck and popped out the bearing cap and sheared the plastic that holds the bearing on the crank side.

Thanks in advance..
Bill   

[VW]

Sure, no problem.  You will probably not be able to find a new maroon/dark red color plate, but should be able to get used one in good condition.  You will need a 9-114H   9-114H Sleeve, Spacing Sleeve
https://www.mysticparts.com/PennParts/Parts/9-114H.aspx

and I recommend an 8-115 Spring, Tension Spring (Thick, Belleville)
https://www.mysticparts.com/PennParts/Parts/8-115.aspx to go on top of the drag stack, under the spacer sleeve.


"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"

[themadog]

Thanks for the help!

[Alto Mare]

New plate from Scotts is around $30 shipped, try this guy for and make him an offer of $15 shipped to you and I'm sure he will do it. The color might also match better than the newer ones:
http://www.ebay.com/itm/USED-PENN-BIG-GAME-REEL-PART-Senator-114H-6-0-6-0-Right-Side-Plate-C-RED-/301096740002?pt=LH_DefaultDomain_0&hash=item461ac3a4a2
Sal

[Shark Hunter]

I've been buying a lot of parts from him. I recently got a 10/0 stand from him!
Score!

[themadog]

Thanks Guys..  I actually was looking at that side plate and it is being shipped as we speak..

Thanks for the help!
Bill