Here is what I currently have in stock for Tom's new run of Cortez Conversions side plates for the Penn 113H 4/0 Senator. These frames and kits also all work with stock Penn made on the USA side plates, but Tiburon says that they will not work with the Chinese side plates Please note that Tiburon's colors may not match the Cortez colors:
1. Used old style black full-frame (with top cross-member) P40N Tiburon Yellowtail Special kit. Has some scarring on the feet of the stand and one small cosmetic blemish on the side wall of the spool, but otherwise a 9. $90
2. Used old style red full-frame Tiburon P40N Yellowtail Special kit. Same condition as above. $95
3. New new style purple T4 standard width frame $75. Add $25 for near mint or new aluminum Penn spool.
4. New new style electric blue T4 standard width frame $75. Add $25 for near mint or new aluminum Penn spool.
5. Unused red Tiburon Hawaiian wide kit. Has tiny ding in edge of frame. Red frame/red spool. $205
What all comes included with the full YT special kit?? I'm looking to upgrade my 4/0
Thanks for your help.
Maybe I should just be more specific. Sorry.
I'm looking for a narrow kit. Frame, spool etc.
I'm planning on doing the 4-1 gear and a 7 drag stack as well.
Thanks for your help
Maurice, the kits include the frame, spool and rod clamp kit. The Yellowtail Special frame width is 2 1/8" vs. 2 7/16" for the standard 4/0.
So I'm really super new to upgrading these reels.
Will this work with the stock side plates I have? Or, as in the title, only the Cortez plates work??
Thanks for your time.
Quote from: Mauriceescobedo on March 05, 2020, 07:16:43 PM
So I'm really super new to upgrading these reels.
Will this work with the stock side plates I have? Or, as in the title, only the Cortez plates work??
Thanks for your time.
Maurice, all of these frames and kits will work with stock made in the USA side plates. Tiburon says that they do not work with the Chinese side plates.
Such a conundrum. So..... this reel I've got, that I've had for about 20 years now, 15 min
Has a penn2 bar, an hL bar and h side plates. It says high speed, but isn't 4-1. Closer to the 3.7-1
Side plates say made in the USA so I'll take a kit.
Please let me know how to pay fo it and I'll do it ASAP
Again, thank you for your time.
It's a high speed compared to the black plated 113 4/0 which is 2:1 ratio. The 4.0 gears are custom made aftermarket gears for even higher speed. Stock ratio for a 113H is 3.25:1. There is no 3.7 . Rudy
Quote from: Mauriceescobedo on March 06, 2020, 03:20:55 AM
Such a conundrum. So..... this reel I've got, that I've had for about 20 years now, 15 min
Has a penn2 bar, an hL bar and h side plates. It says high speed, but isn't 4-1. Closer to the 3.7-1
Side plates say made in the USA so I'll take a kit.
Please let me know how to pay fo it and I'll do it ASAP
Again, thank you for your time.
Here's a xn tib with stock plates for your reference, good luck Maurice you can't go wrong with buying from Randy!
Oh wow. Now I want to go xn.
I need to get this reel apart and do some measurements etc.
Thanks for the reference.
Thank you Darin! Your check will be in the mail.
Quote from: Mauriceescobedo on March 06, 2020, 02:27:54 PM
Oh wow. Now I want to go xn.
I need to get this reel apart and do some measurements etc.
Thanks for the reference.
Maurice, I'm sorry to say that I do not have any more T4XN kits. I will probably run them again but I have no idea when.
Please let me know if you want one of the Yellowtail Special kits, and if so, which one.
Thank you,
Randy
Darin, that reel is a POC. You need to send it me for a look-over and trial. I will have back to you within 365 days, with upgrades such as stock plates, chromed frame with patina, and stock spool with more line capacity. I will also install OEM leather drags- they are highly collectable. No charge for patina on parts; 'cause you're my boy. I will spool it with vintage pink Ande 50 I'm backreeling off a LB68, so the dusty faded part of the line will be on the bottom and you are unlikely to ever see it with the std width spool. It will be killer.
John
Quote from: thorhammer on March 06, 2020, 02:57:58 PM
Darin, that reel is a POC. You need to send it me for a look-over and trial. I will have back to you within 365 days, with upgrades such as stock plates, chromed frame with patina, and stock spool with more line capacity. I will also install OEM leather drags- they are highly collectable. No charge for patina on parts; 'cause you're my boy. I will spool it with vintage pink Ande 50 I'm backreeling off a LB68, so the dusty faded part of the line will be on the bottom and you are unlikely to ever see it with the std width spool. It will be killer.
John
;D ;D ;D
Quote from: RowdyW on March 06, 2020, 03:32:27 AM
It's a high speed compared to the black plated 113 4/0 which is 2:1 ratio. The 4.0 gears are custom made aftermarket gears for even higher speed. Stock ratio for a 113H is 3.25:1. There is no 3.7 . Rudy
Thank you Rudy.
Yes Randy Id like one. Black please.
Let me know how to proceed with payment and the sort
Thank you all for your time
Quote from: Mauriceescobedo on March 06, 2020, 04:47:05 PM
Yes Randy Id like one. Black please.
Let me know how to proceed with payment and the sort
Thank you all for your time
Thank you Maurice. I'm looking forward to working with you. I just responded to your email. Please let me know if it did not come through.
Thanks again,
Randy
Thank you Randy.
Thank you very much
Inventory updated as of March 17, 2020.
PM sent
Thank you Randy I received the yellowtail special kit and she's already together.
Thank you very much. Did a nice upgrade to the internals as well but I'll post that on the penn page.
Thank you again
Maurice
Do you have a 113H narrow 2 1/8" spool? If you only have a kit (spool & Frame) l would still be interested.
Happy fishing
fishbum
Quote from: fishbum on March 13, 2021, 05:08:41 PM
Do you have a 113H narrow 2 1/8" spool? If you only have a kit (spool & Frame) l would still be interested.
Happy fishing
fishbum
I have you covered. PM sent
Hi Randy,
On the off chance any inventory left? Have been looking for a standard width 113H frame forna project.
Regards,
Dave.
Quote from: Taily on March 26, 2024, 05:12:35 AMHi Randy,
On the off chance any inventory left? Have been looking for a standard width 113H frame forna project.
Regards,
Dave.
Dave, I have a nice used red standard width Accurate Accuframe with rod clamp kit for $60 plus shipping. If that works for you I would be happy to send photos.
Thank you,
Randy
Quote from: Vintage Offshore Tackle on March 26, 2024, 08:43:19 PMQuote from: Taily on March 26, 2024, 05:12:35 AMHi Randy,
On the off chance any inventory left? Have been looking for a standard width 113H frame forna project.
Regards,
Dave.
Dave, I have a nice used red standard width Accurate Accuframe with rod clamp kit for $60 plus shipping. If that works for you I would be happy to send photos.
Thank you,
Randy
That's got "me" written all over it Randy, could I trouble you for those pics?
Dave.
That's got "me" written all over it Randy, could I trouble you for those pics?
Dave.
[/quote]
I will take some photos for you tomorrow when I have some good light.
Here are the photos Dave. I have good news and bad news.
The good news is that the frame is even prettier than I had remembered.
The bad news is that the original owner scratched his name on the bottom of the base.
Please take a look at the photos and let me know if you want it. I also have a nice red Tiburon frame for the same price, and a nice red Penn aluminum Anniversary spool for $35 that would look great with either frame.
Very nice. :o
I have sent you a PM Randy. :d
Dave
Here are a few components that might go well with a red 113H, etc.
Hmmmm, they look nice. :D
Have replied to your msg.
Thank you!