diawa 900

[tbucketford429460]

I have a Diawa 900 rock cod reel. I have done the drag up grade but I have misplace the handle arm I had cut it down and re drilled it for one of Alans big grips which I have. Does any one have the correct arm it bolts on to a hub type pices that screws on to the gear sleve. I don't really want to order a new stand to change it to a regular 900 its a pain to order and get the parts.

thanks
Wade

[Bryan Young]

Hi Wade,

Alan Tani has a SS arm for the Daiwa 900H reel http://alantani.com/index.php?topic=13088.0.  Send him a PM as he is back from his long range fishing trip.

Bryan

[tbucketford429460]

Will these arms fit the 910 rock cod or just the 900.
thanks
wade

[Bryan Young]

These will fit the 910 as well. The difference between the 900 and the 910 is the length of the handle arm and the handle.

[ez2cdave]

These will fit the 910 as well. The difference between the 900 and the 910 is the length of the handle arm and the handle.

Incorrect . . . The Set Plate is different and the Handles do not interchange, among other things . . .

See this thread . . .   http://alantani.com/index.php?topic=225.0


( Excerpt below )

QUOTE:

"To convert a sealine 910h to a 900h, you need a 900h set plate (part #783-3302), a 900h handle screw (part #781-2301), a handle set screw (part #353-2811) and a 900h handle (part #748-1101).  you can call daiwa at 562-802-9589 and order these parts.  the total should be somewhere around $30.  add to that a 6/0 kolekar grip for $33 http://alantani.com/index.php?topic=158.0 and a drag washer set for $25 http://alantani.com/index.php?topic=153.0 .




the other alternative is to cut the handle arm of the 910h a little shorter.  the set plate for the 910h is quite a bit shorter than the 900h.





END QUOTE

[Three se7ens]

Where the handle attaches to the gear sleeve is far larger on the 910 than the 600H/900H.  I have handles available for both the 600H/900H, and the 910. You can see the difference in the gear sleeve hole in the picture I attached. 

I have that style and an offset handle for the 600H/900H, and the 910 available on my website.  http://motivefab.com/products-page/reels

[handi2]

Yep they don't fit both reels. I have some of AT new handle blanks and took to my machine shop friend to machine it to fit the 900 reels.

[ez2cdave]

Here is Alan's EXCELLENT tutorial on the DAIWA SEALINE 900H and 910H "Rock Cod Special" (Attached Below).

ALSO, the 910 uses BUSHINGS, while the 900 uses BEARINGS ( They directly interchange ).

Tight Lines ! ! !

[tbucketford429460]

Where the handle attaches to the gear sleeve is far larger on the 910 than the 600H/900H.  I have handles available for both the 600H/900H, and the 910. You can see the difference in the gear sleeve hole in the picture I attached. 

I have that style and an offset handle for the 600H/900H, and the 910 available on my website.  http://motivefab.com/products-page/reels

Just ordered one tonight.
thanks
wade

[Bryan Young]

Thanks for the correction...I wonder...the reel I worked on must have had a modified handle arm them...trickery...thanks.

[LTM]

I really like the NEW offset handle arm of Adams on my 600H! The length is just-right for me and the offset nature/bend of the handle is great. Its nice and thick, solid stainless with a "just-short-of-polished" finish to it (looks like a kinda gun-metal). Dont know if I want to put a mirror polish on it. Will put it on with 5/0 Kolekar from Alan this evening and give the handle the "stank-eye" examination for fit and finish.

Leo

[Rancanfish]

Leo, that handle works for the 900h too right?

Post a pic please!

[ez2cdave]

Thanks for the correction...I wonder...the reel I worked on must have had a modified handle arm them...trickery...thanks.

Where did you get the reel from ?  eBay ?