alan tani @ alantani.com fishing reel repair rebuild tutorial stainless steel gear sleeves - penn squidders, jigmasters, and smaller senators
Reel Repair by Alan Tani
September 23, 2019, 01:13:47 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 ... 8 9 10 11 12 [13] 14   Go Down
  Print  
Author Topic: stainless steel gear sleeves - penn squidders, jigmasters, and smaller senators  (Read 151261 times)
0 Members and 3 Guests are viewing this topic.
mrwilson99
Member
*
Offline Offline

Posts: 224


ProGear & Newell Nut


« Reply #180 on: January 25, 2018, 10:07:52 PM »

Thanks Alan, that might be a bit too much work  Grin
Logged

David
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
*****
Online Online

Posts: 10242


The Reel Whisperer


« Reply #181 on: January 25, 2018, 11:25:08 PM »

Would this fit a Pro Gear 251?
It fits but you have to file down the pin to almost half to make it fit right. It’s definitely simpler to just replace the bridge with a jigmaster bridge and SS gear sleeve.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
mrwilson99
Member
*
Offline Offline

Posts: 224


ProGear & Newell Nut


« Reply #182 on: January 26, 2018, 11:00:23 AM »

I will make this a summer project, I have so many projects going on right now before the season opens. I def want to improve the internals.
Logged

David
jawjacker
Member
*
Offline Offline

Posts: 11


« Reply #183 on: January 29, 2018, 03:08:16 PM »

Are these ss sleeves still available?i need a sleeve for the113h...also looking for the ss bridge with double dogs. Thanks y'all.
Logged
alantani
admin
Administrator
Member
****
Online Online

Posts: 17656



« Reply #184 on: January 29, 2018, 03:44:12 PM »

I have the gear sleeves,  but not the bridge plate.  Check with black pearl and Cortez conversions for the other parts.
Logged

send me an email at alantani@yahoo.com for questions!
Cnhleather
Member
*
Offline Offline

Posts: 1


« Reply #185 on: March 11, 2018, 08:37:27 PM »

Sorry guys but I'm new to upgrading Jigmasters I have a question I just got the GEN 2 coarse thread gear sleeve and washer set that was need my question is where do the washers go I put them both under the main gear SS first then the carbon but after I put my reel back together my drag star seems to not have the same amount of adjustment it did before I did the upgrade I also changed the drag washers to smooth drag
Logged
handi2
Sensei
Member
***
Online Online

Posts: 3406


OCD Reel Service and Repair


« Reply #186 on: March 12, 2018, 04:44:03 AM »

By using the stainless washer and thin Carbontex washer under the main gear it has raised the height just a tad. You will need to sand or file the sleeve just a little to get the drag star to fit and tighten correctly. Making the sleeve shorter.

Keith
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
thorhammer
Member
*
Online Online

Posts: 4023


"You can't drank all day if you don't start..."


« Reply #187 on: March 12, 2018, 06:26:40 AM »

Alan, in the first post of the thread you indicate 113H takes the same "60" sleeve as the 113, unless I misread.
Logged
mo65
The Freshwater Kid...Chillicothe, Ohio
Sensei
Member
***
Offline Offline

Posts: 3075


"This ship is filthy Mr. Christian!"


« Reply #188 on: March 12, 2018, 08:17:48 AM »

After I put my reel back together my drag star seems to not have the same amount of adjustment it did before I did the upgrade I also changed the drag washers to smooth drag

   This is very common with drag upgrades. Especially when converting a stock HT-100 3-stack to a Smooth Drag 5-stack. The thinner washers just don't have the "squish" the thicker ones had, and it translates to the star feeling like it lost travel. This can be offset with some spring washer experimentation. I've ground down the spacing sleeve to allow for an extra spring washer, this increases the star travel. I kind of like the faster action of the thin washers myself...but it does take some getting used to.
Logged

~YOU CAN TUNA GEETAR...BUT YOU CAN'T TUNA FEESH~

Nivek74
Member
*
Offline Offline

Posts: 1


« Reply #189 on: September 28, 2018, 07:56:07 AM »

Are there any SS gear sleeves still available for a Jigmaster 500?
Logged
thorhammer
Member
*
Online Online

Posts: 4023


"You can't drank all day if you don't start..."


« Reply #190 on: September 28, 2018, 08:36:02 AM »

Check Mystic Parts or ProChallenger Websites
Logged
Cortez_Conversions
Sensei
Member
***
Online Online

Posts: 1038



WWW
« Reply #191 on: September 28, 2018, 10:41:15 AM »

I have fine thread sleeves available for both on my website. You will need to swap out the star. I have them as well.
Tom
Logged

Visit: cortezconversions.com
alantani
admin
Administrator
Member
****
Online Online

Posts: 17656



« Reply #192 on: September 28, 2018, 11:33:58 AM »

I only have fine threads as well. Need today do another run.
Logged

send me an email at alantani@yahoo.com for questions!
Kalbi
Member
*
Online Online

Posts: 30


« Reply #193 on: December 08, 2018, 08:14:42 AM »

SS sleeves for squidders/surfmasters still available?
Logged
alantani
admin
Administrator
Member
****
Online Online

Posts: 17656



« Reply #194 on: December 09, 2018, 06:17:37 PM »

check with cortez conversions.  he will be taking over the 98-155 gear sleeves from me.  thanks!   alan
Logged

send me an email at alantani@yahoo.com for questions!
Pages: 1 ... 8 9 10 11 12 [13] 14   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.213 seconds with 17 queries.