Started by Bryan Young, January 29, 2011, 03:41:51 PM
0 Members and 1 Guest are viewing this topic.
Quote from: spearo776 on July 13, 2011, 06:55:49 AMhi guys and girls first post!!! i have the okuma salinas SA80 and the newer sa16000. im in the process of upgrading drags to the carbotex as i just found a supplier here to get 1mm sheet as the felt ones have "melted" from long hard running tuna up to 106lbs. there filled with 50lb spectra. great reels, only downfall in my eyes so far are - bearings in spool and roller bearings don't last to long and the felt washers .i'm sure they could easily fit carbotex ffrom factory. i've filled the body of the reels with sewing machine oil, slight resistance in winding but now i don't notice and have no fear of internals corroding.
Quote from: Bryan Young on January 29, 2011, 03:41:51 PMCedros 65 - Three #6-7000 and custom cut 34 X 57 mm carbon dragsVS30 - Drag rated 18# with felt washers. Three 6-113 for in the top stackOne #6-117 custom cut ID 24 mm for under the spool between the spool and drag plateVS45 - Three #6-30924 X 45.9 mm (Custom Cut from TLD15 20 X 55 X 1.08 mm or Penn's HT-100 (#6-25) hex 22.9 X 54.3 X 1.3 mm) for under the spool between the spool and drag plateVS55 - Three #6-309 HT-10024 X 51 mm (Custom Cut from TLD15 20 X 55 X 1.08 mm or Penn's HT-100 (#6-25) hex 22.9 X 54.3 X 1.3 mm)for under the spool between the spool and drag plate
Quote from: Gobi King on February 05, 2018, 05:01:04 PMOkuma Status STX - OD = 22 mm, ID = 4 mm, thickness is near about 1mm I did not measure, eye balled it.Okuma Avenger AV 30a - OD = 20 mm, ID = 4 mm, thickness is near about 1 mm, I did not measure, eye balled it.
Quote from: Bryan Young on March 05, 2011, 06:23:00 AM...Vsystem has 15 or 16 bearings. What a pain in the butt to service. I sill have 4 more reels to go. Took me 3 hours to service the VS30. next time, it will probably take 2 hours since I know now how and what to take apart and what not to take apart.
Quote from: Tiddlerbasher on February 05, 2018, 09:33:48 PMFYI all Okuma drag washers are 1mm thick so replace felt with cf . Virtually every similar size Okuma reel uses the same size drag washers. Most bearings/bushings are similarly interchangeable on similar size reels. Thaey are cheap and easy to work on I luv em!
Page created in 0.064 seconds with 17 queries.