Okuma screws on the Cortez

Started by bgreen, January 26, 2016, 11:08:03 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

bgreen

January 26, 2016, 11:08:03 PM Last Edit: January 26, 2016, 11:09:51 PM by bgreen
Hi sorry if this is really basic.  I have had a look on site and could not see the answer I was looking for.  On the Okuma Cortez 5 reel I have the screws on the main body of the reel are not the normal flat head or Philips type.  I am wondering what type(and size) of screw driver I need to purchase for these reels.

Thanks!

Tiddlerbasher

#1
January 27, 2016, 10:26:09 AM
Welcome bgreen.
It is a Torx head - T10 or T15 from memory. You can buy a set of standard 1/4" hex drive Torx bits from many hardware sources. They seem to becoming more popular - certainly with Okuma.

bgreen

#2
January 27, 2016, 07:59:22 PM
Quote from: Tiddlerbasher on January 27, 2016, 10:26:09 AM
Welcome bgreen.
It is a Torx head - T10 or T15 from memory. You can buy a set of standard 1/4" hex drive Torx bits from many hardware sources. They seem to becoming more popular - certainly with Okuma.

Hi Thanks for the welcome and the answer.. no its not the most technically challenging question!  Cheers
Print
Go Up Pages1
User actions