Washer stack order?

Started by Saaben, September 20, 2016, 04:15:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Saaben

Hey guys, I ordered my HT-100's from Scotts so they should be here shortly. I have of course spent way too much time making sure I can get my 1950's era 115 back together. In pouring over this site as well as many others I cannot for the life of me find clear information explaining the order of the washers. I am guessing it is so elementary that it may get glossed over. First time taking a reel like this apart so it is all new to me. If the gear was laying flat on the table with the spindle facing up what order would I put them in after greasing. For the hundreth time thanks everyone.

Bryan Young

#1
Start from the Left goes into the main gear first.



HT-100
Keyed Washer (inner hole is like back to back "D")
HT-100
Eared Washer (washer have two protrusions 180 deg. from each other)
HT-100
Keyed Washer (inner hole is like back to back "D")


Start from the Left goes into the main gear first.



HT-100
Keyed Washer (inner hole is like back to back "D")
HT-100
Eared Washer (washer have two protrusions 180 deg. from each other)
HT-100
Keyed Washer (inner hole is like back to back "D")
HT-100
Eared Washer (washer have two protrusions 180 deg. from each other)
HT-100
Keyed Washer (inner hole is like back to back "D")



:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D