Started by handyandy, March 29, 2017, 03:19:58 PM
0 Members and 1 Guest are viewing this topic.
Quote from: handyandy on March 29, 2017, 03:19:58 PMSo I went ahead and took apart the cardinal 3 I had that was pretty rough to go through it and make new drag disc for it. The original felt type drags were shot one was almost none existent. It comes apart and goes together much the same as the cardinal 4 tommy has a great tutorial over that. The main difference is in the drag stack the drag disc don't have the elliptical hole like the cardinal 4's do. So used sedona carbon drag disc again as they are cheap and good overall size for filing down for other applications. I used the same method as I did for making the cardinal 4 drag disc in my other post. Once I got the reel cleaned up put back together the drag and reel all greased and oiled up properly the drag is as smooth as it could ever be. I still need to work on making set of disc that will work on the 4.
Quote from: Gfish on March 29, 2017, 03:50:54 PMReally like my Cardinal 4. Gonna try the drag washer thing too. Now waiting on some 0.5mm C-tex material(sheets) to come. No idea yet where or how to get some metal washers also 'bout 0.5mm, that I can fabricate into "eliptical" shaped base washers(meat in the sandwhich, so to speak). Another fun/learning experience project, though!Gfish
Quote from: Gfish on March 29, 2017, 03:50:54 PM.... No idea yet where or how to get some metal washers also 'bout 0.5mm, that I can fabricate into "eliptical" shaped base washers(meat in the sandwhich, so to speak).
Page created in 0.063 seconds with 21 queries.