alan tani @ alantani.com fishing reel repair rebuild tutorial Shimano Calcutta 400 - carbontex upgrade
Reel Repair by Alan Tani
June 02, 2020, 04:33:45 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 2 3 [4]   Go Down
  Print  
Author Topic: Shimano Calcutta 400 - carbontex upgrade  (Read 67066 times)
0 Members and 3 Guests are viewing this topic.
redsetta
Moderator
Member
****
Offline Offline

Posts: 2793


Auckland, New Zealand


« Reply #45 on: October 30, 2018, 09:57:34 PM »

Quote
...are the ones that smooth drag sells a good choice?
Absolutely
Logged

Fortitudine vincimus - By endurance we conquer
Realfunone
Member
*
Offline Offline

Posts: 7


« Reply #46 on: December 23, 2018, 09:38:53 AM »

Iím replacing the drags and bearings. Iím not clear about grease or no grease on the roller clutch bearing. Grease inside the sleeve but by greasing the clutch bearing usually will cause failure. Whatís the best practice for this bearing.
 Also what is the recommendation on what is recommended for the other bearings. Do I soak them with brake cleaner than tsi? Remove shields ?

Thanks

« Last Edit: December 23, 2018, 09:47:50 AM by Realfunone » Logged
redsetta
Moderator
Member
****
Offline Offline

Posts: 2793


Auckland, New Zealand


« Reply #47 on: February 19, 2019, 11:57:52 AM »

Sorry for the very late reply RFO.
Only use a little bit of light oil (eg Inox) in roller bearings - never grease.
For a casting reel such as this, remove the seals on the spool bearings, clean thoroughly (eg with brake cleaner), then lube and protect with something like TSI301/321.
All others can be packed with marine grease.
Cheers, Justin
Logged

Fortitudine vincimus - By endurance we conquer
Pages: 1 2 3 [4]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.164 seconds with 18 queries.